Funk Pump Drives are designed on a modular concept. This allows you the flexibility of applying Funk drives to numerous design needs. There are four model series available with horsepower capabilities up to 950 SAE hp (708 kW) for each driven pump. Funk Drives offer a variety of gear ratios and hydraulic pump adapters to match your hydraulic system. They are equipped to operate from an independent mount, direct engine mount or as clutch driven units. Adapters are available for a wide variety of engine housings and flywheel sizes.

Series 6100
This series contains eight models of small, high performance, double and triple pump drives. 355 lb,-ft. * (481 Nm) (max) input torque. Available SAE pump sizes A, B, and C.

Series 28000
Single, double, and triple hydraulic pump drives. Quiet efficient spur type gears with a wide choice of ratios. Up to 650lb,-ft.* (881 Nm ) (max) input torque. Available SAE pump sizes A, B, C, and D.

Series 59000
This series is capable of driving 2, 3, or 4 hydraulic pumps from a single unit. Up to 1,250 lb,-ft. * (1694Nm) (max) input torque. Available SAE pump sizes A, B, C, and D.

Series 56000 & 57000
For bigger horsepower applications. Provides 2, 3, 4, or 5 pump drives with up to 2,000 lb,-ft. * (2710 Nm ) (max) input torque. Available SAE pump sizes D, E, and F.

*Ratings may vary depending upon Application and Service. *Application and installation are subject to review by Funk Manufacturing.

Funk Hydraulic Pump Drive literature (441kb)

Funk Hydraulic Pump Drive selection guide (2.6mb)

Telephone 02 8753 6900

International Telephone +612 8753 6900

FAX 02 9647 1550

International Fax +612 9647 1550

Physical Address

Unit A, 62-70 Silverwater Rd Silverwater, 2128 NSW, Australia

E-mail sales@ashleybenoit.com.au